中文
English
A terminal collects all the data
Collecting all the environmental information in the monitoring area, such as air temperature and humidity, light intensity,
carbon dioxide concentration, soil moisture, soil temperature, soil EC value, etc.,
through the radio frequency module self-network data aggregation to the transmission terminal.

Wireless sensor network

Acquisition frequency customization

A variety of power supply

Multiple communication interfaces

Hardware features
Support ADC, IIC, RS485, PWM and other communication interface, easy to extend the sensor
Support the acquisition frequency customization, through WSN (wireless sensor network) self-network transmission
Support the mains, lithium batteries, solar energy supply a variety of ways
Interface introduction
Figure ① for the network port for access to integrated air temperature and humidity sensors, light intensity sensor, carbon dioxide sensor in one of the three in one sensor device.
Figure ② for the 4-core aviation plug interface can be configured as 485 communication interface or ADC communication interface, the default configuration is 485 communication interface for access to soil sensors. The sensor can measure the measured soil moisture, temperature and EC value.
Figure ③ for the 4-core aviation plug interface for 485 or ADC communication output device expansion port, access to other 485 communication interface or ADC output interface sensor devices, such as negative oxygen ions, PM2.5 and so on.
Figure ④ for the power DC seat, access the matching 12V 1A DC adapter for power supply equipment.
Figure ⑤ for the SMA antenna interface for access to 470MHZ antenna.
Figure ⑥, ⑦ for the fixed installation hole)
Indicator light introduction
Figure ①: When the orange power is on, the lamp is on and the power is off.
Figure ②: The red system lights flashes once every 6 seconds The system is running.
Figure ③: Green RTC fault indicator When the light is on, the RTC circuit is faulty and it is off.
Figure ④: Blue sensor failure warning light When the sensor is not connected or sensor Barrier, the normal situation goes out.
Figure ⑤: yellow wireless data transceiver prompt light flash device that is sent when the data, long flash device Receive data.。
  • data analysis
    Monitoring the formation of the terminal is not only real-time data, there are a lot of historical data available for viewing and calling at any time; view the amount of data, date and specific data items, managers can customize the view and icon comparison analysis, for environmental changes , Managers can have a clearer and more intuitive experience, and can make the most reasonable decision.
  • Cloud platform monitoring center
    With a full range of environmental monitoring icons for managers to view at any time, while the current crop growth status and other cloud platform using the function of fast entrance.
Transmission distance
  • Large-scale networking
    While supporting more than 100 monitoring terminals
  • Transmission stability
    Packet loss rate of less than 1%
  • Easy to install
    Plug and play
  • Cost-effective
    Mass production, the price
    advantage is obvious
  • Full maintenance
    Maintenance for one year
About us
Guangzhou Hoire Mdt InfoTech Ltd

WeChat public number

RUI NONG BAO
Tel:020-82109055
Fax:020-82109055-8033
Email:gzhoire@163.com
Address:Guangzhou hi tech Industrial Development Zone, Science City, spectrum West Road No. 69, TCL Cultural Industry Park creative center, 2 floor
版权所有 © 广州海睿信息科技有限公司  粤ICP备16074627号-1